Commercial Sectional Door Systems
Every product we supply is backed with quality service & installation by our highly experienced, certified technicians. A quality product is only as good as its installation.
Operation
Rolling doors can be equipped with many types of operators including:
- Manual push up
- Manual Chain hoist
- Manual Crank
- Electric Motor Operators
- Belt Drive
- Gearhead
- Waterproof
- Explosion Proof
- Specialty controls including
- Loop Detectors
- Card Readers
- Photo Cells
- Key Stations
- Traffic Signals
| Model Thermospan® 200 and 200-20 |
 Thermospan® 200 and 200-20
A door that represents the best technology available today.
Architects, engineers, contractors and building owners who place energy conservation foremost in their planning will readily recognize the significance of Thermospan® 200 & 200-20, an insulated overhead sectional door for commercial and industrial applications.
Features:
 Energy efficiency - Thermospan® 200 & 200-20 is a total insulating system, including thermal barrier and joint seals as well as vinyl top seal and bottom astragal-all attached to the door sections. All seals are factory-installed to save installation time and avoid the problems sometimes found on conventional doors due to inadvertent exclusion of seals during installation.
Extended limited warranty Sections are warranted for TEN (10) YEARS against cracking, splitting, or deterioration due to rust-through, and SEVEN (7) YEARS against separation/degradation of foam insulation. TEN (10) YEARS on insulation value.
 Thermospan® 150 Features
Designed to be Energy-Efficient! Insulation materials placed between two metal surfaces without a thermal break greatly reduce the effectiveness of the insulation. Generally, the outer surface of conventional steel doors wraps around and becomes a part of the inner door surface. The process used to make Thermospan®150 is different. It begins with two separate skins: one for the inner and another for outer surfaces. These skins are separated along each edge of each section by a thermoplastic material that effectively breaks any contact between inner and outer skins.
To assure thermal integrity, seals between all section joints are factory-installed, as are vinyl “bulb” astragals which prevent air infiltration between floor and bottom of doors. Because of these features, an excellent “U”-value of 0.0706 is achieved. Testing on a conventional insulated steel door resulted in a “U”-value of only 0.233.
 Thermospan® 125 Features
Maximum efficiency and operation - Chemical bonding of CFC free polyurethane to steel skins creates a unitized body with superior strength, insulation and dent-resistant characteristics.
Energy efficiency - The polyurethane core is surrounded by hot-dipped galvanized steel skins providing insulating efficiency. The Thermospan 125 has a R-value of 10.79. A bulb-shaped vinyl astragal provides added protection against air and water infiltration.
 Steel Gauge Commercial Sectional Doors
Combining value with security and rugged construction
Steel gauge doors are used for commercial applications combining value with security and rugged construction. As the industry leader in sectional steel products, Wayne-Dalton offers a variety of standard and customized designs.
Steel Gauge Commercial Sectional Doors Features
Durability - Roll-formed exterior ribs and baked on polyester paint.
 Aluminum Full View Doors
Combining maximum light and visibility with security
Aluminum series doors are used for commercial applications combining maximum light and visibility with security. As the industry leader in sectional garage doors, Wayne-Dalton offers a variety of standard and customized designs.
Aluminum Full View Doors Features
Durability - Model 451/452 has a minimum wall thickness of .062" on the rail body while model K-AL has a minimum wall thickness of .058" on the rail body.
Aluminum Stiles & Rails
- Model 451/452 - 6063T6 alloy
- Model K-AL 6063T5 alloy
| Wood Commercial Sectional Doors |
 Wood Commercial Sectional Doors
Combining durability and a rustic look with security
Wood doors are used for commercial applications combining durability and a rustic look with security. As the industry leader in sectional garage doors, Wayne-Dalton offers a variety of standard and customized designs.
Wood Commercial Sectional Doors Features
Durability - ¾" thick commercial construction with primer finish
Stiles & Rails - Hemlock or stika spruce.
Insulation - Model 320 polystyrene core
Specifications and Drawings
Wayne-Dalton offers specifications and full technical support for our commercial products. For further information please visit our product solution center.
 |
